Welded Longitudinal Finned Tubes ASTM A312 TP316L For Oil Refining Projects

ASTM A312, a standard of seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe, intending for high-temperature and general corrosive service. Welded TP316L stainless steel tubes have the following core performance advantages:

• High corrosion resistance: Chloride-induced pitting/crevice corrosion (critical for seawater, chemical processing) / Sulfuric acid, phosphoric acid, and brine environments.
• Cost efficiency, more cheaper than seamless tubes.
• Long Service Life.

Chemical Composition (%)

For small diameter or thin walls or both, where many drawing passes are required, a carbon maximum of 0.040% is necessary in grades TP304L and TP316L. Small outside diameter tubes are defined as those less than 0.500 in. [12.7 mm] in outside diameter and light wall tubes as those less than 0.049 in. [1.20 mm] in average wall thickness (0.044 in. [1.10 mm] in minimum wall thickness).

Mechanical Properties

Tests:Transverse or Longitudinal Tension Test, Flattening Test, Grain Size, Flaring Test, Flange Test, Hardness Test, Hydrostatic Test or Nondestructive Electric Test.

Manufacture:Welded (WLD) pipe shall be made using an automatic welding process with no addition of filler metal during the welding process.

Surface Condition:The pipe shall be free of scale and contaminating exogenous iron particles. Pickling, blasting, or surface finishing is not mandatory when pipe is bright annealed. The purchaser is permitted to require that a passivating treatment be applied to the finished pipe.

Definition

Longitudinal finned tubes are produced by resistance welding fins along the long direction of the tube and fins first form a U-shaped channel so that each leg of the U-shape forms a fin.

Common base pipe/tube material: carbon / alloy steel (A106, A333, A179, A335 P5, P22, P9, etc.; stainless steel TP304, TP316L,TP321, etc.;copper alloy CuNi 70/30, CuNi 90/10, etc and other material.

Advantages in Oil Refining

Corrosion & Temperature Resistance
• Resists acidic crudes/sour gases: Mo content mitigates pitting in HCl/H₂S-rich streams (e.g., crude distillation overhead condensers).
• High-temp stability: Continuous service up to 870°C, which is ideal for fired heater convection sections.

Heat Transfer Efficiency
• 3–5× surface area vs. bare tubes, enhanced radiant heat absorption and delays coking on tube walls.
• Axial flow optimization: Reduces pressure drop in viscous fluids .

Application

Longitudinal finned tubes are widely used in industries where axial flow heat transfer, high-temperature stability, and corrosion resistance are critical.Generally applicable to power stations or large high-temperature old equipment in the oil industry:

Oil & Gas Refining
*Crude Oil Processing:Charge Gas Heaters / Overhead Condensers / Delayed Cokers.
*Hydroprocessing & FCC Units: Feed/Effluent Exchangers / Flue Gas Coolers.
*Sulfur Recovery (SRU):Waste Heat Boilers.

Petrochemical & Chemical Plants
*Ethylene Crackers / Reformer Furnaces / Polymer Reactors.

Power Generation
*Heat Recovery Steam Generators (HRSG) / Flue Gas Desulfurization (FGD) / Gas Turbine Inlet Air Cooling.

LNG & Cryogenic Applications
*LNG Heat Exchangers / BOG (Boil-Off Gas) Compressors.

HVAC & Industrial Heating
*Thermal Oil Heaters / Hot Air Generators.

Specialty Applications
*Solar Thermal Systems / Nuclear Reactors.

Typical Oil Refining Applications

Specifications For Various Types Of Finned Tubes

Yuhong Holding Group has more than 35 years experience for pipeline products, till now we have 3 big joint venture factories,  the total production area more than 130000 square meters, and more than 600 workers with 106 production lines give our clients excellent supporting always.   The factories already got certificates like : ABS, LR, DNV-GL, BV, KR, CCS, ASME, ISO 9001, ISO14001, ISO18001, ect.

Our factories main products as below : 
Factory 1th: Stainless steel seamless tube, Duplex steel seamless tube, Super duplex steel seamless tube, Nickel alloy steel seamless tube;

Factory 2th: Carbon steel seamless tube, Alloy steel seamless tube; Enhanced Heat Tranfer Tube, low fin tube ,U bending workshop;
Factory 3th: High frequency welding fin tube(HFW fin tube, Solid Fin tube, Studded Tube, Serrated Fin tube, Longitudinal welding fin tube), Wound fin tube(L type fin tube, LL type fin tube,  KL type fin tube), Embedded G type fin tube , Extruded fin tube,  low fin tube, U bend & 180deg. Return;

Yuhong Holding Group also has gained rich experience for project package( products contain:Pipes, Fittings, Flanges, heat exchanger, furnace, fired heater, air cooler, boiler) , YUHONG brand has marked its global presence in more than 85 countries, like, Korea, USA, Canada, Mexico, Colombia, Bolivia, Chile, Argentina, Brazil, Ecuador, Austria, New Zealand, Singapore, Malasyia, Indonesia, Thailand, Vietnam, Ukraine, Turkey,Sauid Arabia, Qatar, U.A.E,Israel,India, UK, France, Italy, Gernmany, Poland, Spain,... We have successfully implemented the orders of Cross Country Pipelines for our valuable customers. In addition, we have also developed a huge network of contacts and strategic alliances with most important manufacturers as stockists around the world.